cENTRIFUGAL & SUBMERSIBLE PUMPS
Technology/Process
Description:
Fisher Pumps was
established in 1967 .With more than 2 decades of engineering experience, it has
emerged as the largest producer of water pumps in India in the brand name
FISHER in international market and SHARP in Indian market covering a whole
range of pumps that include peripheral economy pumps, centrifugal and
submersibles with an annual production capacity of over 300,000 pumps. The
centrifugal pumps are suitable for farms, gardening, industrial water supply
and transfers where heavy pumping is required.
The submersible pumps are ideally
suitable for pumping clean water from open wells and sumps in high rise
residential and commercial buildings.
Pumps
Technology/Product
Specifications:
PRODUCT: OLYMPIA- SUBMERSIBLE PUMPS
The Olympia series of pumps with techno polymer impellers, diffusers,
stainless steel shaft and body are reliable, durable and efficient. The pumps are
ideally suitable for pumping clean water from open wells and sumps in high rise
residential and commercial buildings.
The special wear ring
between impeller and diffuser facilitates better operating efficiency. The
reliable float sensor protects the pump from dry running. Incorporated with
thermal protection and oversized bearings for greater service life.
The pumps can
generate a maximum head of 80 m and has a capacity of 8 m /hour.
The dominance of stainless steel parts makes the pump rugged and enhances the
service life. The multistage pump design yields higher efficiency and consumer
lesser power.
CLEAN WATER
AUTOMATIC SUBMERSIBLE PUMP
Olympia pumps have following features:
·
Built-in float
sensor for automatic on/off & dry run protection
·
Double
mechanical seal motor protection
·
Stainless
steel shaft and pump body
·
Noryl &
poly carbonate impeller and difusser
·
High
efficiency multistage design
·
Thermal overload
protector
Construction Features:
|
Pump Body |
SS 304 |
|
Impeller |
Noryl |
|
Mechanical Seal |
High Alumina / Graphite |
|
Shaft |
SS 410 |
|
Motor Body |
SS 304 |
|
Diffuser |
Poly Carbonate |
Technical Data:
|
Insulation Class |
Class F |
|
Rating |
Continuous |
|
Standard Voltage |
220 – 240 V/50 Hz |
|
Protection |
IP – 68 |
|
Liquid Temperature Range |
0° to 35° C |
|
Maximum Head |
76 m |
|
Pumped Liquid |
Fibre free water |
The Olympia pump has two models:
· Olympia 150
· Olympia 210
|
MODEL |
PIPE SIZE |
P1 kW |
In A |
HP/kW |
M3/hr |
0 |
1.5 |
3 |
4.5 |
6 |
|
Lph |
0 |
1500 |
3000 |
4500 |
6000 |
|||||
|
OLYMPIA 150 |
1.25” |
1.6 |
7.0 |
1.5/1.1 |
Head (M) |
60 |
50 |
40 |
18 |
5 |
|
OLYMPIA 200 |
1.25” |
2.1 |
9.0 |
2.0/1.5 |
85 |
76 |
60 |
30 |
8 |
Besides
Centrifugal and Submersible Pumps, company also manufactures special type of
pressure systems which are sold with
brand name Apollo.
In addition to
Pumps, they also manufacture Prssure Systems; a brief profile is as follows:
PRESSURE SYSTEMS
The
Apollo range of Pressure Systems incorporating the electronic control unit is
reliable, durable and convenient. The Apollo pressure systems are ideally
suitable for pressurizing the complete house, villa, office and bathrooms.
The
Apollo electronic control unit enables automatic pump control and the special
logic circuitry protects the pump from dry running. The inbuilt check valve
eliminates the need for a separate check valve at the pump outlet.The surge
suppression circuitry protects the electronic parts from harmful power
disturbances and spikes. The inbuilt pressure gauge continuously reads the cut
in and cut off pressures.
Incorporated
with thermal protection and heavy duty motor for greater service life, the
pumps can generate a maximum pressure of 4 bar and has a capacity of 6 m /hour. The PS -Dual can take two input
sources, one from cold water and one from hot water source. The PS - Dual is
ideally suitable where a common hot water source is available such as the solar
water. The hot water from solar heater is connected to one pump and the cold
water source is connected to the second pump.
The
multistage pump design yields higher efficiency and hence consumes lesser power
than single impeller pumps. The use of pressure regulator (PRV) at the outlet
of the pressure system avoids excessive pressure build up in the pipe line and
protects critical equipments such a low pressure water heaters and closets
Company
Profile
|
Company Name |
Fisher Pumps Pvt. Ltd. |
|
Address |
9/10, Sharp Nagar, Kallapatti,
Coimbatore- 641035, Tamil Nadu, India |
|
Contact person |
Mr. K.R.Parthiban |
|
Phone |
+91-0422-2627958 , 2627626 |
|
Fax |
+91- 0422 2627441 |
|
E-mail |
|
|
Web Site |
|
|
Year of Establishment |
1967 |
|
Product(s) Manufactured |
Complete range of pumps including
peripheral economy pumps, centrifugal and submersibles pumps |
|
Installed Capacity per annum |
3,00,000 pumps |
|
Sales Turnover |
FY 05: USD 2 Mn FY 04: USD 3.0 Mn FY 03: USD 4.0 Mn |
|
Conformity to Standards |
Indian Standards |
|
Compliance to ISO |
ISO 9001 |
|
Foreign Collaboration |
NIL |
|
Manpower Total (Nos.) |
192 |
|
Effluent Generated |
NIL |
Broad
Profile of Project Offer
|
Project
|
To
Manufacture Centrifugal & Submersible Pumps |
|
Capacity per Annum |
1,00,000
units |
|
Land
Requirements/ Building Requirements |
1500
Sq. M |
|
Plant & Machinery and Test
Equipment |
·
CNC Lathes ·
Winding
Machines ·
Assembly
Lines ·
Test jigs
& Fixtures ·
Testing
Tanks ·
Testing
Equipments ·
QA –
Instruments ·
Local
Foundry ·
Local
Machine shops |
|
Electrical Installation |
150
KW |
|
Implementation Period |
6
Months |
|
Manpower Required |
60 |
|
Raw
Materials / Equipment Required |
·
Stainless
Steel shaft ·
Graded
Castings Machine Shop ·
Plastic
Moulding Machines |
|
Total Project Cost |
USD
0.5 Mn |
|
Expected
Annual Sales |
USD
0.2 Mn |
|
Profitability |
10% - 15% |
|
Form of
Offer |
Turnkey
Project |